3inch 4 Stroke Gasoline Engine Water Pump, 7.5HP 212cc Gas Powered Trash Water Transfer Pump with 24.61ft Hose, Portable Gasoline Engine Water Pump for Farmland Garden Watering/Irrigation

How to Use1. Place the machine flat and pour in engine oil until there is just oil dripping out. Excessive or insufficient oil will affect operation.2. Add 92 # gasoline.3. Fill the pump head with water until there is water overflow at the outlet.4. Move the red flameout switch up to the ON position.5. Adjust the throttle switch to the left, adjust the air outlet to the left, and adjust the oil circuit switch to the right.6. Start the machine by pulling out a small section of the pull rope and then quickly pulling the pull rope.7. Connect the inlet and outlet pipes.SpecificationModel: WP30X, 170F-7.5HPColor: Black, RedMaterial: Aluminum Alloy, Carbon SteelProcesses: Die-castingAssembly Required: YesPower Source: 92#Gasoline, 5W-40 Engine OilMax. Power: 4KWMax. Torque: 12/250N.m/r/minInlet/Outlet Diameter: 80mm/3 inLift: 30m/98ftSuction Height: 7m/23ftFlow: 60 m³/2119ft ³/hEngine Type: 4-stroke, Single Cylinder, Air-cooledEngine Displacement: 212ccEngine Power: 7.5HPPower Speed: 3600rpmIgnition Method: Contactless Transistor IgnitionStart Method: Manual StartFuel Tank Capacity: 3.6L/0.95 GalOil Capacity: 0.6L/0.16 GalNoise: 66DB (A)Fuel Tank Endurance: 5hGross Weight: 22.5kg/49.6 lbsPipe Length: 7.5m/24.61ftProduct Size: 49*37.5*40.5cm/19.29*14.76*15.95inPackage Size: 50.5*38.5*43cm/20*15*17inApplicationThis product can be widely used in a variety of scenarios, such as long-distance water transmission in farmland, large-area sprinkler irrigation in gardens, water for firefighting, fishpond aquaculture, water exchange in swimming pools, and water extraction from deep wells.Package Included1* 4-Stroke Gasoline Engine Water Pump1* Water Pipe1* English InstructionAll Accessories for Assembly

• High Efficiency: The premium carburetor allows the fuel to fully burn, converting it into strong power. The 7.5HP high-power engine with 212cc displacement gives it a rotation speed of 3600rpm and provides a flow rate of up to 2119ft³ per hour to quickly pump water out of rivers or ponds, and provides a suction height of 23ft and a total lift height of 98ft, allowing you effortlessly to fully irrigate your farmland, improving your efficiency and saving you time.
• Safety Guard: Multiple evenly distributed heat dissipation holes can timely dissipate the heat, and effectively guarantee safety during use to avoid burnout or breakdown. The four impellers can ensure excellent sealing performance and handle particles with a diameter of 1/3 inch, and the air filter can also reduce the risk of blockage. The built-in oil protector prevents cylinder pulling and bursting caused by not adding oil or insufficient oil, making it reliable and safe to use.
• Sturdy and Durable: The aluminum alloy, carbon steel, and die-casting process make it resistant to rust, impact, and deformation, allowing it to withstand repeated and extended use in various pumping scenarios.
• High Stability: The thick carbon steel, anti-slip support feet, and sturdy construction can reduce vibration to a certain extent, and ensure the stability of the machine during operation, making it reliable to use.
• Continuous Work: It is equipped with a 0.95 Gal fuel tank, which allows it to work continuously for about 5 hours, reducing frequent refueling, and allowing you to complete a large amount of pumping work at once without being interrupted.