Dial Indicator Torque Wrench,Indicating Torquemeter,Precision TLB Torque Wrench for Torque Testing,Cursor Spanner Wrench 0-100 N.m, EOU-LCR-71B767

Operation Tips:1. Before using, you must first adjust the zero position!When using the right hand, rotate the knob above the dial counterclockwise to make the red follower pointer abut against the black active pin; rotate the case to make the follower pointer zero to the dial torque.When using the left hand, turn the knob above the dial clockwise to make the red follower pointer abut against the black active pin; rotate the case so that the follower pointer points to the zero position of the dial torque line.2. When using, apply the tightening force slowly and smoothly until the driven pointer is at the desired torque value.3. After the force is stopped, the active pointer automatically returns to the zero position, the slave pointer still stays on the indicated scale value, and the torque value can be accurately read. Rotate the knob above the dial to return the slave pointer to zero for the next use.Specifications:- Torque Range: 0-100 Newton meter- Accuracy: ±3%- Driving Square Tenon: 12.5 x 12.5 millimeter (1/2" x 1/2")- Size: 31 x 4 x 3 centimeter / 12" x 1.6" x 1.2"- Weight: 1.1 kilogrammes / 2.4 poundsPackage Included:1 x Dial Torque Wrench1 x CaseHow to Use:1. Calibrate to zero before use.2. Gradually and smoothly tighten until the driven pointer reaches the desired value.3. Once tightening is complete, the active pointer automatically returns to zero, while the slave pointer remains on the indicated value. Take note of the reading.4. Reset the slave pointer to zero for future use.ATTENTION:- Avoid disassembling the device or applying excessive force, as it may affect its accuracy.- Keep the plastic parts away from high temperatures to prevent damage.- Do not exceed the specified torque range during use to ensure optimal performance and longevity.- This dial torque wrench is designed to be used in both clockwise and counterclockwise directions for versatility.

• The Dial Indicator Torque Wrench is a meter indicator for torque measurement of threaded fasteners that can be arbitrarily tested over the range.
• Adjust the zero position before using,using the right hand to rotate the knob above the dial counterclockwise to make the red follower pointer abut against the black active pin; rotate the case to make the follower pointer zero to the dial torque.
• Using the left hand to turn the knob above the dial clockwise to make the red follower pointer abut against the black active pin; rotate the case so that the follower pointer points to the zero position of the dial torque line.
• After the force is stopped, the active pointer automatically returns to the zero position, the slave pointer still stays on the indicated scale value, and the torque value can be accurately read. Rotate the knob above the dial to return the slave poi
• This precision TLB torque wrench is suitable for fastener torque testing with high precision requirements