FastCap 2P-10 Glue Kit with Activator & Debonder

Made in USA 

• FastCap Glue Kit ~ Professional Wood Formula - Cyanoacrylate Glue
• Sets in 10 - Cures in 30 seconds
• Includes: Thin, Medium, Thick, & Jel viscosity glues - 2.25 oz glue bottles
• 2.25 oz Activator & 2.25 Debonder
• 4000 PSI tensile shear
• Includes 5 micro tips, 1 pump spray & 2 small brushes
  

• Product Description
• Specs

• 
  

   A professional wood formula Cyanoacrylate super glue kit set made by FastCap. 2P-10 is a two-part ten-second adhesive. Just apply the adhesive, then spray the activator & stick it together for a strong, permanent bond. Very popular with woodworkers & carpenters. Triple distilled for purity. 2-year shelf life guaranteed.   Made in USA.  NOTE: This product can only be shipped via Ground Shipping. Please allow extra time for delivery.

  
  

     Technical Information

     •    2P-10 is a 2-part 10 second adhesive. It bonds in 10 seconds & fully cures in 30 seconds (with activator).

     •    2P-10 is a triple distilled, industrial strength CA glue or cyanoacrylate adhesive. Unlike consumer grade CA glues ("Super Glue"), 2P-10 is triple distilled to remove all impurities, has a higher solids content, & does not require preservatives to stabilize it.

     •    2P-10's Acidically Stabilized Wood Formula resists the acidic nature of wood, preserving the full strength of the glue joint.

     •    2P-10 cures at 4000 PSI in both tensile & sheer strength. It has been tested in a 5-year environmental chamber with extreme temperatures, both hot and cold, with no adverse effects and can withstand up to 5 years of direct submersion in water before the glue degenerates.

     •    2P-10 can be used on a variety of different materials such as wood, metal, plastic, tile, stone, lacquered surfaces, & solid surface materials. It creates strong bonds on rough, semi-porous & smooth surfaces on a variety of difficult to bond materials. Ensure parts are clean, dry & free from oils, grease & cleaners.

     •    Store in a cool area out of direct sunlight (below 70°), storing in a refrigerator at 40° F is optimum. While these conditions are ideal, 2P-10 is successfully used without refrigeration in very hot climates. If you are keeping your 2P10 in your vehicle, consider storing it in a lunch cooler.

• Product	Model #
  FastCap 2P-10 Glue Kit with Activator & Debonder	2P-10 KIT