Honeywell Ademco 4190SN 2-Zone Expander Two-Zone Remote Point Module

The ADEMCO 4190SN addressable V-PlexTM module is a two-zone expander which allows use of the available expansion zones provided by ADEMCO controls that support V-Plex devices.Serial mode programmable Left Zone - EOLR supervised, open or closed circuit sensorsRight Zone - unsupervised, closed circuit sensorsUL listed for fire and burglary installations FEATURESThe 4190SN consists of two detection loops, known as the left (primary) and right (secondary) loops. The left loop can be used for:Closed-circuit devices with or without EOLR supervision Open-circuit devices, with EOLR supervision Fast-response (10 millisecond) devices Follow the chart below for cutting the correct jumpers and choosing the correct resistor when using the left loop. The right loop can be used for:Closed-circuit devices only Has no EOLR supervision 400 millisecond response time The jumpers do not affect the operation of the right loop. The right loop cannot be used alone. Supervision:The tamper/supervision response of the 4190SN is determined by the zone response type assigned to the left loop zone. While the system is armed, tamper/supervisory faults will report as alarms if the left loop zone is assigned a burglary response type and will report as troubles if the left loop zone is assigned a non-burglary response type (i.e., fire, panic, aux). While the system is disarmed, tamper/supervisory will always report as troubles.

• The ADEMCO 4190SN addressable V-PlexTM module is a two-zone expander which allows use of the available expansion zones provided by ADEMCO controls that support V-Plex devices.
• Closed-circuit devices with or without EOLR supervision
• Open-circuit devices, with EOLR supervision
• Fast-response (10 millisecond) devices