P.A. Unloader Valve Pressure Washer Pump Pulsar 4/Rv – 4500 PSI 10.5 GPM
Product details
| Management number | 229484521 | Release Date | 2026/05/31 | List Price | $31.95 | Model Number | 229484521 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Replacement for General Pump PULSAR4HPOptimized internal passages that guarantee reduced pressure loss. Antirotation device of the piston positioned inside the valve and obtained by an hexagonal sector of the piston itself. O-rings of the fittings positioned upstream to the thread : no risk of fittings ejected in case of overpressure. Double feed connection. Version with knob fitted with locknut for minimum working pressure adjustment.1) The valve has been designed for a continuous use with water at a temperature of 60°C (140°F). It can work for short periods with water at the maximum temperature of 90°C (195°F).2) When the valve is in bypass mode, this is the decrease of pressure that has to occur in the circuit downstream of the valve, in order that the valve can restore the working pressure in the system. The indicated figure is expressed as a percentage of the pressure setting (working pressure).3) If the valve is fed through the lower inlet port, the maximum flow rate is 20 l/min. At gun closure, a pressure increase occurs in the circuit downstream of the valve. This pressure increase is used to activate the valve and discharge all the flow in bypass. The value of the pressure increase cannot be calculated. It depends on the correct setting of the valve (see PRESSURE ADJUSTMENT/SETTING) and on the layout of the system: flow rate, working pressure, length and characteristic of the tubes, closing time of the gun.
- Max. permissible pressure: 4500 psi (310 bar), Rated pressure: 4050 psi (280 bar), Max. flow rate: 10 US gpm (40 L/min), Inlet/outlet/bypass: ⅜″ NPT F, Max. temperature: 195 °F (90 °C)
- Made in Italy. Unloader valve with 2 ports each for inlet and bypass, and a knob on the pressure regulator for convenient adjustment.
- Quality Replacement Unloader Valvefor All High Pressure pumpAR Comet Cat pump BE. Replacement for General Pump PULSAR4HP
- Product number 60.0007.65
- 7x5 toll-free phone, email and live chat support from Canada
| UPC | 748347675764 |
|---|---|
| ASIN | B07KTC5HX5 |
| Size | ⅜ inch |
| Brand Name | PA PULSAR |
| Unit Count | 1.0 Count |
| Valve Type | unloader valve |
| Item Weight | 1.72 Pounds |
| Thread Size | ⅜ inch |
| Thread Type | NPT |
| Manufacturer | PA Spa |
| Model Number | 60.0007.65 |
| Material Type | Brass |
| Connector Type | Threaded |
| Exterior Finish | Brass |
| Number of Ports | 2 |
| Maximum Pressure | 4500 Pound per Square Inch |
| Specification Met | ISO, EN, ANSI, ASME, ASTM |
| Included Components | Regulator Knob |
| Inlet Connection Type | ⅜ inch NPT Female |
| Outlet Connection Size | 0.38 Inches |
| Outlet Connection Type | ⅜ inch NPT Female |
Bestseller ranking
Urban & Land Use Planning
Customers who viewed this product also viewed
Accessories
Correction of product information
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form