PATIKIL Small Melting Ceramic Crucible Bowl Dish, 5000g Ceramic Quartz Crucibles Dish Pot for Refining Casting Metal Gold Silver Copper Brass Alloy Beading Jewelry

Crucible bowls are great for melting and casting metals, gold, silver, copper, brass, alloys, and other high-temperature alloys, and are widely used in chemical and industries and chemical laboratories.SpecificationColor: WhiteSize: 6.7 x 5.9 x 2.4 x 1.9 x 6.9inch/170 x 150 x 62 x 47 x 175mm(OD*ID*Height*Bottom OD*Total width)Ceramics MaterialCapacity: 5000gPacking List:1 Pcs x Crucible.AdvantagesThe melting ceramic crucible bowl is made of Alumina with a purity greater than 99Crucible bowls are great for melting and casting metals, gold, silver, copper, brass, alloys, and other high-temperature alloys, and are widely used in chemical and industries and chemical laboratories., It can withstand temperatures up to 1000-3000°CIt has high density and will not be mixed with other item during the melting process. It is corrosion-resistant and impact-resistant. Better anti-oxidation ability.InstructionsSlowly heat the quartz ceramic bowl before use.NOTEIt is recommended that the heating speed should not exceed 50 degrees Celsius per minute. Heating and cooling during the test process should be as slow as possible to extend the service life of the product.

• Specification: Color: White, Size: 6.7 x 5.9 x 2.4 x 1.9 x 6.9inch/170 x 150 x 62 x 47 x 175mm(OD*ID*Height*Bottom OD*Total width), Ceramics Material, Capacity: 5000g, Packing List: 1 Pcs x Crucible.
• Advantages: The melting ceramic crucible bowl is made of Alumina with a purity greater than 99%, It can withstand temperatures up to 1000-3000°CIt has high density and will not be mixed with other item during the melting process. It is corrosion-resistant and impact-resistant. Better anti-oxidation ability.
• Instructions: Slowly heat and the quartz ceramic bowl before use.
• Application: Crucible bowls are great for melting and casting metals, gold, silver, copper, brass, alloys, and other high-temperature alloys, and are widely used in chemical and industries and chemical laboratories.
• NOTE:It is recommended that the heating speed should not exceed 50 degrees Celsius per minute. Heating and cooling during the test process should be as slow as possible to extend the service life of the product.