Speedway Motors Swedged Steel Adjustable Threaded Tube with 1/2-20 LH/RH Threads, 3/4 OD .065 Wall, 9 Inch Length, Zinc Plated, Universal Chassis and Steering Use

Zinc plated steel tube with .065-inch wall thickness for steering, shift linkage, and other chassis uses. Suitable for tie rod, drag link, chassis bracing, and light vehicle suspensions. Ends threaded 1/2-20 LH and RH threads for rod ends or bushings of your choice. Available in 18 lengths from 7-inches to 24-inches long in 1-inch increments. Outside diameter of tube is .750-inch. IMCA approved component. Thin wall construction with swedged ends offers lighter weight than comparable non-swedged tubes. Single rotation will adjust the overall length in or out by approximately 3/32-inch. Knurled surface to aid in rotating the tube to make required adjustments. Order by actual length measurement required for application. Swedged Tubing Provides Similar Strength with Less Weight Weight is the enemy of a race car. Any time you can save weight without reducing integrity or creating an unsafe situation you will benefit. Utilizing thin wall steel tubing for such things as control arms, Panhard bars, steering linkage, and more are all great ways to not only save weight but allow your suspension and steering to react faster to changes in the track surface, which ultimately keeps your race car’s tires in contact with the racing surface for precise throttle, braking, and steering control that can put you in the winner’s circle. One easy way to save weight is to replace heavy wall steel suspension and steering tubes with thin wall steel versions that utilize a swedged end. Swedged tubing is the perfect upgrade to these suspension and steering pieces when sized properly for the application. Swedging the ends of the steel tubing shrinks the outside diameter down, which thickens the wall of the tubing in the area where threads are created for the heim joint, bushing, or clevis end piece to be installed. This critical area is cold formed, which further strengthens the steel tube

• High-Strength Construction – Made from 3/4" OD steel tubing with .065" wall thickness and swedged ends to deliver excellent strength while reducing overall weight
• Easy Length Adjustment – Features 1/2-20 left-hand and right-hand threads on opposite ends, allowing precise adjustment by simply rotating the tube
• Lightweight Swedged Design – Thin-wall tubing with cold-formed swedged ends provides comparable strength to heavier tubing with faster suspension and steering response
• Zinc-Plated Finish – Gold zinc coating helps protect against rust and wear while adding durability for demanding chassis and steering applications
• Universal Racing Applications – Ideal for tie rods, drag links, chassis bracing, and suspension components; IMCA approved and available in multiple length options