Spiral Design Ice Pop Mold,Home/Commercial Ice Lolly Mold, Ice Cream Moulds w/Wooden Sticks(40Pcs 82g/0.18lbs Spiral Design)

DescriptionThis premium stainless steel ice cream mold is designed specifically for home and small commercial use. The unique spiral design helps you create exquisite and unique ice cream, enhancing product appeal. 40 independent slots can be mass-produced, greatly improving work efficiency. Whether it's a family gathering or a business operation, it can bring you an excellent experience!ApplicationThis product is suitable for making ice cream in various flavors.How to UseClean the ice cream mold before use.Put the ice cream stick into the cover plate.Pour in the ingredients you have prepared.Cover the cover plate and put it into the refrigerator or special machine for freezing.Refrigerator freezing for more than 6 hours, according to their own equipment to control the freezing time.After all the ice cream is frozen, take out the whole mold and put it into 100.4 ℉ warm water. Swing left and right for 10 seconds, and quickly pull up the mold cover to open the mold completely.Take the special container, pull the loose mold rod, quickly remove the cover, and then put the special container into the freezer.After use, the ice cream mold should be cleaned, dried, and stored.SpecificationMaterial: 304 Food-grade Stainless SteelColor: SilverProcess: WeldingStyle: ModernAssembly Required: NoMounting Type: FreestandingCapacity: 82g/0.18lbs*40 pcsEach Mold Size: 32*29*125mm/1.26*1.14*4.92inProduct Size: 365*240*290mm/14.37*9.45*11.42inPackage Size: 38*27*31cm/14.96*10.63*12.2inGross Weight: 7.52kg/16.58lbsNet Weight: 7.14kg/15.74lbsPackage Included1* Ice Cream Mold2 Bundles* Wooden SticksNotesWhen the ice cream is just condensed, it is very soft and smooth, and the refrigeration time should not be too long.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

• 【Easy Demolding and Easy to Clean】You just need to soak the mold in water for about 1-2 minutes, then grab the handle and easily pull out your ice pops. The simple structure, detachable cover, and cleaning brush make your daily cleaning easy without taking up too much of your time and energy.
• 【Large Capacity and Last for Years】It comes with 20 compartments, each with a capacity of 0.25 lbs, allowing you to make 20 popsicles at once, which can well meet your different usage needs. It is made of stainless steel material, with a premium electroplating process, which is rust-resistant and not easily worn or deformed, ensuring a long service life.
• 【Details】Smooth Edges: They enhance the beauty of the product and better care for your skin when installing and cleaning it. Practical Handles: They can make it easier for you to demold and clean this mold. Convenient Lid: It can prevent popsicles from overflowing from the mold and also prevent dust from falling into the mold.
• 【Thoughtful Design and Ready to Use】This product is equipped with a bracket base, which allows it to be placed smoothly on the desktop, allowing you to better complete demolding and filling. You can use this product directly without assembly after receiving it, which saves you time and energy.
• Stainless Steel: Ice Cream Mould is made of BPA 304 food grade stainless steel popsicle mould with log sticker, for longtime use, healthy and safe