Vessel 220USB-1DG Electric Ball Grip, Driver, Limited Color, Dull Green, 1 Bit Included, Electric Ball

[Use] Electrical equipment and board assembly Device and equipment maintenance For automobiles, two-wheel maintenance, DIY, etc. Features: Limited edition color (Dull Green) Easy to charge via USB. About 60 minutes of charging can tighten about 200 M4 x 0.8 inch (20 mm) screws. No load rotational speed: 280 rpm. Electric tightening torque (max): 2 Nm USB port for easy charging. Equipped with overcharge protection, over-discharge protection, and over-current protection. The product weighs 5.6 oz (160 g). High hardness LED light to help work in low-light sites. Lights up for 5 seconds for checking after use. Sleeve chuck for easy bits replacement. Forward slide to prevent bits from falling out. The included bits are slim shaped, and include a shaft cover to prevent short accidents that are intended for work in terminal blocks, electrical boards, etc.

• Grip length: 5.5 inches (140 mm); Grip diameter: 1.8 inches (45 mm); Weight: 5.6 oz (160 g); Sleeve: 0.2 inches (6.35 mm); Aluminum sleeve chuck
• Battery Capacity: Li-Ion 3.6 V, 800 mAh, No-load Rotation Speed: 280 min-1, Torque (Max): 2.6 lb/m (electric), Endurance Torque (manual): 10 Nm (2 Nm)
• Charging Time: Approx. 60 min. Number of charges: Approx. 500 times. Continuous usage time: Approx. 40 minutes (with no load). Charging method: Micro USB-type B USB charging
• Made in Japan
• Compatible Screws: Up to M6 (+3 does not support M8), Torque Range: (Electric) - 2 Nm (Manual) - 10 Nm