VIPMOON 12 Pcs 3Pin 8mm Solderless LED Light Strip Connectors, Strip to Strip Quick Connector for 8mm Wide Waterproof and Non-Waterproof WS2811 WS2812B LED Strip Lights

Specification:Working voltage: 0-36VMaximum pin current: 5AInterface type: 3pinWorking PCB width: 8mmWorking environment temperature: -20~50℃Installation Tips:1. Cut the strips to the length you need, and then fully open the clamp.2. Push the strip in until it touches the backing, let the pins touch the connector, and then press down firmly to make sure the pins pierce the strap. (You can use tools such as pliers)3. Reminder: a,Please make sure corresponding the "+" and "-" nodes ; two light strip when installing the connection to avoid the lamp beads of the light strip be destroyed;b. Please make sure that the contact point of the light strip is in contact with the copper sheet of the buckle; c. When connecting the light strip, there is no need to peel off the adhesive on the back of the light strip.Package Content :12Pcs 3pin quick connectors for strip to strip quick connection（universal for 8mm waterproof or non-waterproof 3pin light strips）

• What You Get: 12Pcs 3pin 8mm led strip connectors for strip to strip quick connection, gapless solderless connection. 1pcs mini screwdriver.【Please make sure that the "+" and "-" poles of the light strips connected at both ends are consistent.】
• Specification: Those 3pin led connectors are suitable for waterproof or non-waterproof 8mm wide led strip light. Rated voltage: 0-36V; Rated current: 5A
• Easy to Use: The upgraded crystal 3pin rgb connectors are convenient and easy to use, and the premium transparent PC material makes your DIY LED light strips project reduce the dark area and awesome.
• Stable Operation: The sharp copper thorn design on the LED connectors can directly pierce clearly and align stably the contacts of the led light strips, no soldering, easy use, even slight swings and pulls can ensure a firm connection. [Note: If there is a protective layer of adhesive tape or plastic housing on the surface of the light strip, you need to tear off the adhesive tape or plastic housing on the connecting end part. ]
• Warm Tips: Please turn the front of the light strip down to make sure the contacts can touch the copper pins of the connector while installing. Be sure to pay attention to corresponding the "+" and "-" of the two light strip when installing the connection to avoid the destroy of the lamp beads of the light strip.